• IPv6hostslinux_fedora

TableOfContents

IPv6hostslinux fedora

# Uses following information from "/etc/sysconfig/network":
#  NETWORKING_IPV6=yes|no: controls IPv6 initialization (global setting)
#  IPV6_DEFAULTDEV=<device>: controls default route (optional)
#  IPV6_DEFAULTGW=<address>: controls default route (optional)
#
# Uses following information from "/etc/sysconfig/network-scripts/ifcfg-$1":
#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
#  IPV6ADDR=<IPv6 address>[/<prefix length>]: specify primary static IPv6 addres
s
#  IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional)
#  IPV6_ROUTER=yes|no: controls IPv6 autoconfiguration (no: multi-homed interfac
e without routing)
#  IPV6_AUTOCONF=yes|no: controls IPv6 autoconfiguration
#   defaults:
#    IPV6FORWARDING=yes: IPV6_AUTOCONF=no, IPV6_ROUTER=yes
#    IPV6FORWARDING=no: IPV6_AUTOCONF=yes
#  IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional)
#
# Optional for 6to4 tunneling (hardwired name of tunnel device is "tun6to4"):
#  IPV6TO4INIT=yes|no: controls 6to4 tunneling setup
#  IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay (default: 192.88.99.1)
#  IPV6TO4_MTU=<MTU for IPv6>: controls IPv6 MTU for the 6to4 link (optional, default is MTU of interface - 20)
#  IPV6TO4_IPV4ADDR=<IPv4 address>: overwrite local IPv4 address (optional)
#  IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup local subnetting
#    Example: IPV6TO4_ROUTING="eth0-:f101::0/64 eth1-:f102::0/64"
#
# Optional for 6to4 tunneling to trigger radvd:
#  IPV6_CONTROL_RADVD=yes|no: controls radvd triggering (optional)
#  IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/var/run/radvd/radvd.pid" (optional)
#  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP)